V-belt Optibelt BCP 140
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- B
- Series
- Conveyor Power
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT BCP 140 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for BCP 140 and any equivalents.
The Optibelt BCP 140 is a classical V-belt from the Conveyor Power series, built for industrial drives that run on B-profile sheaves. Before you fit a replacement, inspect the drive: worn sheave grooves and misalignment will shorten the life of any new belt, regardless of make.
The BCP 140 measures 3632 mm in length, with a 17 mm top width, 11 mm height and a 40° angle. It is a classical V-belt in profile B. These dimensions let you confirm the belt matches the sheave groove before installation. Check sheaves for wear, cracks, or buildup in the grooves, and verify that the shafts are aligned. A straightedge or laser alignment tool across the sheave faces will show whether the drive is true.
If the old belt shows uneven wear, glazing, or cracking on one side, the sheaves or alignment are likely contributing. Correct any issue before fitting the new belt. When a drive uses multiple belts, replace the full set at the same time so the load stays shared evenly. The BCP 140 can be identified by its marking on the back of the belt, which carries the part number and size.
To request a quote, send the part number BCP 140, the quantity, and the drive details by WhatsApp or email. If you are unsure whether this is the right belt, include a photo of the marking on the old belt and the sheave dimensions. The team can confirm the profile and length, or suggest an equivalent.
Dimensions
- Section
- B
- Length
- 3632mm
Frequently asked questions
- What are the dimensions of the Optibelt BCP 140?
- It is a profile B classical V-belt with a length of 3632 mm, a top width of 17 mm, a height of 11 mm and a 40° angle.
- Should I replace all belts on the drive at once?
- Yes. On multi-belt drives, fitting a full set at the same time helps keep tension and load sharing even across the belts.
- What information do I need to send for a quote?
- Send the part number BCP 140, the quantity required, and any drive or sheave details. A photo of the old belt marking can help confirm the correct replacement.