V-belt Optibelt BCP 112
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- B
- Series
- Conveyor Power
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT BCP 112 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for BCP 112 and any equivalents.
The Optibelt BCP 112 is a classical V-belt in the Conveyor Power series. It has a B profile, a length of 2921 mm, a top width of 17 mm, a height of 11 mm and a 40-degree angle. To match it to the belt being replaced, confirm these same markings on the old belt.
Start by reading the marking on the back of the belt you are removing. The part number BCP 112 identifies this belt, while the profile and length confirm the size. This belt is profile B with a length of 2921 mm. Check that the old belt shows the same profile and length before ordering.
Measure the old belt only if the marking is no longer readable. A B profile belt has a top width of 17 mm and a height of 11 mm, and this belt runs at a 40-degree angle. Compare those dimensions and the 2921 mm length against the replacement. If the old belt is a different profile or length, it is not a direct match.
When you request a quote, send the part number BCP 112 and the profile and length from the old belt. If the marking is worn, send the top width, height and length you measured. The team can confirm the right belt or suggest an equivalent from what we carry.
Dimensions
- Section
- B
- Length
- 2921mm
Frequently asked questions
- How do I confirm the Optibelt BCP 112 matches the belt I am replacing?
- Read the marking on the back of the old belt. It should show the same part number or the same profile and length. This belt is profile B, 2921 mm long, 17 mm top width, 11 mm height, 40-degree angle.
- What measurements should I send if the old belt marking is unreadable?
- Send the top width, height and length you measure from the old belt. For this belt those are 17 mm top width, 11 mm height and 2921 mm length. Also note the profile if you can identify it.
- Can I request a quote by part number?
- Yes. Send the part number BCP 112 by WhatsApp or email. If you include the profile and length from the old belt, the team can confirm the match or suggest an equivalent.