V-belt Optibelt B 88
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- B
- Series
- VB / Red Power
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
GATES and OPTIBELT: matching part numbers →OPTIBELT and STARK: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT B 88 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for B 88 and any equivalents.
Before you fit this Optibelt B 88 VB / Red Power belt, inspect the drive. Check sheave grooves for wear, rust, and embedded debris, and confirm alignment and belt tension. Correcting these first protects the new belt and keeps the drive running as intended.
This is a classical V-belt in the B profile. It measures 2311 mm in length, with a 17 mm top width, an 11 mm height, and a 40° angle. The same size is also listed under Stark B 88. If you are replacing an existing belt, read the marking on the back of the old belt and match the profile and length to this one.
Inspect each sheave for worn grooves, cracks, or buildup, and check that the sheaves are aligned. Replace worn sheaves before fitting the new belt. On multi-belt drives, replace all belts as a set so the load is shared evenly. After fitting, check tension again once the drive has run under load.
For a quote, send the part number B 88 and the quantity you need by WhatsApp or email. If you are unsure whether this B-profile belt is the right match, include the old belt marking and a photo of the drive, and the team can help confirm the correct belt or suggest an equivalent.
Dimensions
- Section
- B
- Length
- 2311mm
Frequently asked questions
- What should I check on the drive before fitting this belt?
- Check the sheave grooves for wear, rust, and debris, confirm the sheaves are aligned, and make sure the tensioning arrangement works freely. Worn or damaged sheaves should be replaced before the new belt is fitted.
- What are the dimensions of this Optibelt B 88 belt?
- It is a classical V-belt in the B profile with a length of 2311 mm, a top width of 17 mm, a height of 11 mm, and a 40° angle.
- How do I request a quote for this belt?
- Send the part number B 88 and the quantity you need by WhatsApp or email. If you want help confirming the match, include the marking from the old belt and a photo of the drive.