V-belt Optibelt B 210
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- B
- Series
- VB / Red Power
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT B 210 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for B 210 and any equivalents.
The Optibelt B 210 is a classical V-belt from the VB / Red Power series. It has a B profile, a 5410 mm length, a 17 mm top width, an 11 mm height, and a 40-degree angle. Before you fit this belt, inspect the drive and sheaves.
Check sheave grooves for wear, rust, or buildup that can shorten belt life. Verify that the sheaves are aligned and that the groove angle matches the 40-degree angle of this belt. Look for cracks, glazing, or missing material on the sheaves.
Measure the old belt and confirm the profile and length. The Optibelt B 210 has a B profile and a 5410 mm length. If the old belt is worn or stretched, use the part number rather than the measured length to order the correct replacement.
After fitting, check tension and recheck after the first hours of running. Keep sheaves clean and aligned to get the most from this classical V-belt.
Dimensions
- Section
- B
- Length
- 5410mm
Frequently asked questions
- What are the dimensions of the Optibelt B 210?
- It has a B profile, a 5410 mm length, a 17 mm top width, an 11 mm height, and a 40-degree angle.
- How do I request a quote for the Optibelt B 210?
- Send the part number B 210 by WhatsApp or email. Our team will reply promptly to confirm the belt.
- What should I check before installing this belt?
- Inspect the sheaves for wear, rust, and alignment, and confirm the groove angle matches the 40-degree angle of the belt.