V-belt Optibelt B 114
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- B
- Series
- VB / Red Power
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
GATES and OPTIBELT: matching part numbers →OPTIBELT and STARK: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT B 114 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for B 114 and any equivalents.
This Optibelt B 114 belt is a classical V-belt from the VB / Red Power series. It is used on industrial drives where a wrapped classical profile is specified. Confirm fit by matching the profile and the length to the old belt.
The B profile has a 17 mm top width, an 11 mm height and a 40° angle. The length is 2972 mm. These dimensions are the primary check when replacing a belt on a drive. Measure the old belt or read the marking on its back, then compare the profile letter and the length in millimeters.
Classical V-belts are common on fans, pumps, compressors and other plant equipment driven by a single or multiple belt set. A worn belt can slip, run hot or set up vibration. Inspect the sheaves for wear and alignment before fitting a new belt, and replace belts in sets where the drive uses more than one.
The same size is also listed under Stark B 114. For a quote, send the part number B 114, the quantity and any details from the old belt. If you are unsure of the profile or length, send a photo of the marking and the team can help confirm the right belt.
Dimensions
- Section
- B
- Length
- 2972mm
Frequently asked questions
- How do I confirm that the Optibelt B 114 fits my drive?
- Check the profile and the length. The B profile is 17 mm wide at the top, 11 mm high and has a 40° angle. The length is 2972 mm. Compare these with the marking on the old belt or with the drive specification.
- What should I send to get a quote for this belt?
- Send the part number B 114 and the quantity you need. If you have the old belt, include the profile and length from its marking, or a photo of the marking.
- Can I use another brand for this size?
- The same size is also listed under Stark B 114. Send that reference or the dimensions and the team can help confirm a match.