V-belt Optibelt AX 90
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- AX
- Series
- Super TX
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
DAYCO and OPTIBELT: matching part numbers →GATES and OPTIBELT: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT AX 90 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for AX 90 and any equivalents.
The Optibelt Super TX AX 90 is a cogged classical V-belt with an AX profile and a length of 2337 mm. Before you fit it, take a few minutes to inspect the drive and sheaves. Small alignment or wear problems will shorten the life of any new belt.
Check each sheave groove for wear, rust, burrs and embedded debris. A worn groove lets the belt sit too deep and slip, while a polished or stepped groove face points to replacement. Confirm the sheaves are aligned with a straightedge across the faces, and check that the shafts turn freely without play. If the drive uses more than one belt, fit the full set together so the load is shared evenly.
Read the marking on the back of the old belt and compare it with the AX profile and 2337 mm length of this Optibelt Super TX belt. The same size is also listed under Dayco AX 90 and Gates AX 90, which can help you confirm the size when the old marking is worn. Send the part number, the belt marking and a photo of the drive by WhatsApp or email, and our team will confirm the right belt or suggest an equivalent.
Cogged classical V-belts are used on industrial drives where a standard wrapped belt runs hot or bends over small pulleys. The cogs improve flexibility and heat dissipation. Keep the drive clean, keep the belt free of oil and grease, and recheck tension after the first hours of running.
Dimensions
- Section
- AX
- Length
- 2337mm
Frequently asked questions
- How do I confirm this is the right belt for my drive?
- Compare the marking on the old belt with the AX profile and 2337 mm length of the Optibelt Super TX AX 90. If the marking is unreadable, send a photo of the drive and the pulley dimensions, and we will help confirm the size.
- What should I check on the drive before fitting a new belt?
- Inspect the sheave grooves for wear, rust and debris, check that the sheaves are aligned, and make sure the shafts turn freely. On multi-belt drives, replace all belts in the set at the same time.
- What do you need to quote this belt?
- Send the part number AX 90, the quantity, and the delivery address by WhatsApp or email. A photo of the old belt marking or the drive helps us confirm the correct belt.