V-belt Optibelt AX 71
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- AX
- Series
- Super TX
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
OPTIBELT and STARK: matching part numbers →DAYCO and OPTIBELT: matching part numbers →GATES and OPTIBELT: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT AX 71 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for AX 71 and any equivalents.
The Optibelt Super TX AX 71 is a cogged classical V-belt with an AX profile and a length of 1854 mm. Before fitting it, inspect the drive and sheaves so the new belt runs true and wears evenly. We carry this belt and quote by part number.
Start by checking the sheave grooves for wear, rust, or embedded debris. Worn grooves let the belt sit too deep, which reduces grip and shortens belt life. Confirm the sheaves are aligned and the correct profile and length match the drive. The AX profile and 1854 mm length identify this belt.
Turn the drive by hand and look for seized bearings, bent shafts, or damaged guards. Any of these will damage a new belt quickly. If the drive uses multiple belts, replace them as a set so loads stay even. The same size is also listed under Stark AX 71, Dayco AX 71, and Gates AX 71.
When you request a quote, send the part number AX 71 and the belt marking. If the old belt is worn or the marking is unclear, send the drive details and photos. The team replies promptly and can help confirm the right belt or suggest an equivalent.
Dimensions
- Section
- AX
- Length
- 1854mm
Frequently asked questions
- What should I check on the drive before installing this belt?
- Inspect the sheave grooves for wear, rust, or debris, and verify alignment. Turn the drive by hand to check for seized bearings or bent shafts. Correct any issues before fitting the new belt.
- How do I identify this belt on the machine?
- Look for the part number and profile on the belt back. This belt is marked AX 71 with an AX profile and a length of 1854 mm. If the marking is worn, measure the length and note the drive details.
- What information do you need for a quote?
- Send the part number AX 71, the belt marking, and the drive details. Photos of the old belt and sheaves help confirm the correct replacement. The team replies promptly by WhatsApp or email.