V-belt Optibelt AX 30
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- AX
- Series
- Super TX
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
GATES and OPTIBELT: matching part numbers →DAYCO and OPTIBELT: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT AX 30 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for AX 30 and any equivalents.
The Optibelt Super TX AX 30 is a cogged classical V-belt with an AX profile and an 813 mm length. When you need to replace a belt on a drive, the most reliable approach is to match the belt you are removing. This page covers how to confirm the AX 30 is the correct replacement.
Start by reading the marking on the back of the old belt. Look for the profile and the length, and compare them to the AX profile and 813 mm length of the Optibelt Super TX AX 30. If the old belt is worn or the marking is unreadable, measure the outside length and check the cross-section against the AX profile. A belt that matches in both profile and length will seat correctly in the pulley grooves.
The same size is also listed under Dayco AX 30. If your drive uses multiple belts, inspect all of them and replace them as a set so the load is shared evenly. Check the pulleys for wear, alignment and debris at the same time. A cogged classical V-belt like the Super TX AX 30 is used where a standard classical profile is specified.
To request a quote, send the part number AX 30, the brand Optibelt and the quantity you need by WhatsApp or email. If you are unsure whether the AX 30 is the right belt for your drive, include a photo of the old belt marking and the pulley dimensions. The team can confirm the belt or suggest an equivalent.
Dimensions
- Section
- AX
- Length
- 813mm
Frequently asked questions
- How do I know if the Optibelt Super TX AX 30 is the right replacement?
- Match the profile and length to the belt you are replacing. The AX 30 has an AX profile and an 813 mm length. If the old belt marking is readable, compare it directly. If not, measure the outside length and check the cross-section.
- Can I replace just one belt on a multi-belt drive?
- It is good practice to replace all belts on the drive as a set. Belts that have run together wear together, and mixing a new belt with old ones can cause uneven loading.
- What information should I send to get a quote?
- Send the part number AX 30, the brand Optibelt and the quantity. If you want confirmation, include the old belt marking and the pulley dimensions.