V-belt Optibelt AX 110

OPTIBELT AX 110 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for AX 110 and any equivalents.

This Optibelt Super TX belt is a cogged classical V-belt with an AX profile and a length of 2845 mm. The cogged construction is common on drives with small pulleys, where a standard wrapped belt may not flex as easily. Use the marking on the old belt and the drive dimensions to confirm it is the correct replacement.

Cogged classical V-belts like this AX 110 are used on industrial drives such as fans, pumps, compressors and other equipment where the pulley diameters are small enough that flexibility matters. The AX profile is a classical narrow cross-section, and the 2845 mm length is the datum to match. Check the belt that came off the drive: the profile and length should match, and the pulley grooves should be free of wear or debris before installation.

The same size is also listed under Dayco AX 110 and Gates AX 110. If the old belt is marked with one of those numbers, this Optibelt Super TX belt is the same profile and length. Confirm the drive takes an AX profile and that the length matches the routed path, including any idler or tensioner.

For a quote, send the part number AX 110, the profile AX and the length 2845 mm, along with the equipment make and model if you have it. A photo of the marking on the back of the old belt helps confirm the match. If you are replacing a set, note how many belts the drive uses so the set can be quoted together.