Timing belt Optibelt AT5 825
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Power
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT AT5 825 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for AT5 825 and any equivalents.
The Optibelt AT5 825 is an Alpha Power timing belt with an AT5 profile, an 825 mm length and a 5 mm pitch. This page is set up for the person matching a belt that is already on the machine: read the marking on the old belt, compare it against this listing, and send the part number for a quote.
The most reliable match is the marking on the back of the belt you are replacing. If it reads AT5 825, this Optibelt Alpha Power belt is the same profile and the same length. If the old belt is worn or the print has rubbed off, measure the length along the belt and check the tooth profile before ordering.
The AT5 profile is a synchronous belt profile, and the 5 mm pitch is the distance between tooth centers. The 825 mm length is the belt's datum length. Both values must agree with the belt being replaced; a belt with the same profile but a different length will not fit the drive correctly.
We carry the Optibelt AT5 825 Alpha Power timing belt. Send the part number AT5 825 by WhatsApp or email with the quantity you need, and our team will confirm the belt or suggest an equivalent.
Dimensions
- Profile
- AT5
- Pitch
- 5mm
- Length
- 825mm
Frequently asked questions
- How do I confirm this is the right belt for my drive?
- Check the marking on the back of the belt you are replacing. If it shows AT5 825, this Optibelt Alpha Power belt matches that profile and length. If the marking is unreadable, measure the belt length and identify the tooth profile before you order.
- What do the AT5 and 825 mean on this belt?
- AT5 is the profile, and 825 is the length in millimeters. The pitch is 5 mm, which is the distance from one tooth center to the next. All of these must match the belt being replaced.
- What should I send to get a quote?
- Send the part number AT5 825, the quantity, and any details from the old belt marking. Our team will reply promptly to confirm the belt or suggest an equivalent.