Timing belt Optibelt AT10 1150
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Power
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT AT10 1150 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for AT10 1150 and any equivalents.
When a timing belt needs replacing, the most reliable starting point is the marking printed on the back of the old belt. This page covers the Optibelt AT10 1150 from the Alpha Power series, a timing belt with an AT10 profile and a 1150 mm length. The 10 mm pitch matches the original specification for drives that use this profile.
Read the old belt before you remove it. The back of a timing belt typically carries the profile, the length and the manufacturer's part number. Write these down exactly as they appear, because profile and length together identify the belt. The Optibelt AT10 1150 is defined by its AT10 profile and 1150 mm length, with a 10 mm pitch. If your drive currently runs a belt marked with those same figures, this is the correct replacement.
If the marking is worn or unreadable, measure the old belt and count the teeth. The profile is the tooth shape and pitch; the length is the developed length in millimeters. For a quote, send us the full marking you can read, along with the drive details. Our team can confirm the AT10 1150 or suggest an equivalent when the original marking is incomplete.
Dimensions
- Profile
- AT10
- Pitch
- 10mm
- Length
- 1150mm
Frequently asked questions
- What should I send to get a quote for this belt?
- Send the complete marking from the back of the old belt, including the profile, length and any part number. If the marking is not legible, send the profile and the length in millimeters, plus a photo of the old belt. We will confirm the Optibelt AT10 1150 or suggest a suitable alternative.
- How do I know if this belt fits my drive?
- The belt must match the drive's pulley profile and the required length. The Optibelt AT10 1150 has an AT10 profile and a 1150 mm length with a 10 mm pitch. Compare these figures with the marking on your old belt. If they match, this belt is the correct replacement.
- Can I replace just one belt in a multi-belt drive?
- In drives that use more than one belt, replace all belts at the same time. Belts wear at the same rate, and mixing a new belt with old ones can cause uneven tension and load. Use the marking from each old belt to order the correct quantity of the same profile and length.