V-belt Optibelt A 72
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- A
- Series
- VB / Red Power
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
DODGE and OPTIBELT: matching part numbers →GATES and OPTIBELT: matching part numbers →OPTIBELT and STARK: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT A 72 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for A 72 and any equivalents.
Replace a classical V-belt with confidence by matching the Optibelt VB Red Power A 72 to the belt you are removing. This belt has an A profile, a 1880 mm length, a 13 mm top width, an 8 mm height and a 40° angle. Use the old belt's marking and dimensions to confirm it is the correct part.
Before ordering, read the marking on the back of the old belt. Look for the profile letter and length number. The Optibelt VB Red Power A 72 is an A profile belt with a length of 1880 mm. Check that the top width is 13 mm and the height is 8 mm. These dimensions help you match the belt to the drive.
If the old belt is worn or the marking is unreadable, measure the outside length and the top width. A profile A belt has a 40° angle. Confirm the belt sits correctly in the pulley groove. A belt that is too wide or too narrow will not grip properly.
The same size is also listed under Stark A 72. If you need help confirming the right belt or suggesting an equivalent, send the part number and any photos of the old belt. Our team replies promptly by WhatsApp or email.
Dimensions
- Section
- A
- Length
- 1880mm
Frequently asked questions
- How do I confirm the Optibelt VB Red Power A 72 matches my old belt?
- Check the marking on the back of the old belt for the profile and length. The A 72 has an A profile and a length of 1880 mm. Also verify the top width is 13 mm and the height is 8 mm.
- What should I send to get a quote for this belt?
- Send the part number A 72 and the brand Optibelt. If you have the old belt, include a photo of its marking and dimensions. Our team will confirm the belt or suggest an equivalent.
- Can I use the Stark A 72 as an alternative?
- The same size is also listed under Stark A 72. Both are A profile belts with a length of 1880 mm. Contact us to confirm the best option for your drive.