V-belt Optibelt A 63
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- A
- Series
- VB / Red Power
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
DODGE and OPTIBELT: matching part numbers →GATES and OPTIBELT: matching part numbers →MITSUBOSHI and OPTIBELT: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT A 63 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for A 63 and any equivalents.
The Optibelt A 63 is a classical V-belt in the VB / Red Power series with an A profile and a length of 1651 mm. Before fitting it, inspect the drive and sheaves so the new belt runs correctly. We carry this belt and can help you confirm it or suggest an equivalent.
Start by checking the sheaves for wear, misalignment, or damage. Worn grooves can cause a new belt to slip or wear quickly, even when the belt size is correct. Confirm that the sheave groove matches the A profile and that the belt sits at the proper height in the groove.
The A 63 has a top width of 13 mm, a height of 8 mm, and a 40-degree angle. Its length is 1651 mm. These dimensions must match the drive requirements. If the old belt marking is unreadable, measure the drive and note the sheave diameters and center distance.
When ordering, send the part number A 63 and the brand Optibelt. The same size is also listed under Mitsuboshi A 63. For a quote, contact us via WhatsApp or email with the part number and any details about the drive.
Dimensions
- Section
- A
- Length
- 1651mm
Frequently asked questions
- What should I check on the drive before installing this belt?
- Inspect the sheaves for wear, misalignment, and damage. Make sure the grooves are clean and match the A profile. Verify that the belt sits correctly in the groove and that the drive is properly aligned.
- What are the dimensions of the Optibelt A 63?
- It has an A profile, a length of 1651 mm, a top width of 13 mm, a height of 8 mm, and a 40-degree angle.
- How do I request a quote for this belt?
- Send the part number A 63 and the brand Optibelt via WhatsApp or email. We will confirm the belt or suggest an equivalent.