V-belt Optibelt A 53
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- A
- Series
- VB / Red Power
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
DODGE and OPTIBELT: matching part numbers →GATES and OPTIBELT: matching part numbers →OPTIBELT and STARK: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT A 53 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for A 53 and any equivalents.
When replacing a classical V-belt, matching the profile and length on the old belt is the surest way to get the right part. This Optibelt A 53 from the VB / Red Power series is a classical V-belt with an A profile and a length of 1397 mm. The same size is also listed under Stark A 53.
Before ordering, read the marking on the back of the belt you are replacing. Confirm the profile is A and the length is 1397 mm. Also check the top width of 13 mm, the height of 8 mm, and the 40° angle. These dimensions define the belt's fit in the pulley groove.
If the old belt is worn, stretched, or the marking is unreadable, measure the outside length and compare it to 1397 mm. A belt that is too long or too short will not transmit power correctly and can damage pulleys. The Optibelt A 53 is a direct match when the original is an A-profile belt of this length.
For a quote, send the part number A 53, the brand Optibelt, and the quantity you need. If you are unsure, include a photo of the belt marking and the pulley groove. Our team can confirm the profile and length, and if needed, suggest an equivalent.
Dimensions
- Section
- A
- Length
- 1397mm
Frequently asked questions
- How do I confirm this is the right belt for my drive?
- Check the marking on the old belt: it should show an A profile and a length of 1397 mm. Also verify the top width is 13 mm, the height is 8 mm, and the angle is 40°.
- What if the marking on my old belt is worn off?
- Measure the outside length of the old belt and compare it to 1397 mm. If it matches, and the cross-section is about 13 mm by 8 mm, this Optibelt A 53 is the correct replacement.
- Can I use a different brand if I find the same size?
- Yes, the same size is also listed under Stark A 53. As long as the profile, length, and dimensions match, it will fit the same drive.