V-belt Optibelt A 32
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- A
- Series
- VB / HVAC Power
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
DODGE and OPTIBELT: matching part numbers →GATES and OPTIBELT: matching part numbers →OPTIBELT and STARK: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT A 32 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for A 32 and any equivalents.
This page covers the Optibelt A 32, a classical V-belt with an A profile and a length of 864 mm. It is used in drives where the original belt carries the same profile and length. Matching those two markings is the first step when replacing a belt.
To match this belt to the one being replaced, read the marking on the back of the old belt. Confirm the profile is A and the length is 864 mm. The A 32 also has a top width of 13 mm, a height of 8 mm and a 40° angle. If the old belt is worn or the marking is unreadable, measure the outside length and compare it with 864 mm, then check the profile against the pulley groove.
The same size is also listed under Stark A 32. If the drive uses more than one belt, replace the full set at the same time and keep the belts matched by profile and length. Check the pulleys for wear, alignment and debris before installing the new belt, and set tension according to the drive manufacturer's specification.
Dimensions
- Section
- A
- Length
- 864mm
Frequently asked questions
- How do I confirm the Optibelt A 32 is the right replacement?
- Check the marking on the old belt for an A profile and an 864 mm length. The A 32 also has a 13 mm top width, 8 mm height and 40° angle, which you can compare with the old belt and the pulley groove.
- What should I send to request a quote?
- Send the part number A 32, the brand Optibelt, and the quantity you need. If you are replacing an unmarked belt, include the profile, the length and the drive details.
- Can I replace just one belt on a multi-belt drive?
- For drives with multiple belts, replace the full set at the same time. Keep the replacement belts matched by profile and length, and check pulley alignment and tension after installation.