V-belt Optibelt A 24
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- A
- Series
- VB / HVAC Power
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
DODGE and OPTIBELT: matching part numbers →GATES and OPTIBELT: matching part numbers →OPTIBELT and STARK: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT A 24 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for A 24 and any equivalents.
The Optibelt A 24 is a classical V-belt with an A profile and a 660 mm length. Before you fit it, inspect the drive and sheaves so the new belt runs true and lasts.
Check sheave grooves for wear, rust, or embedded debris. Worn grooves let the belt sit too deep, which leads to slip and heat. Confirm the sheaves are aligned and the shafts turn freely. If you find damaged grooves, correct them before installing the A 24.
This belt has a 13 mm top width, 8 mm height, and a 40-degree angle. These dimensions match the sheave groove it is designed to run in. When replacing, compare the old belt marking with the A 24 to confirm profile and length. The same size is also listed under Stark A 24.
After fitting, check tension and recheck it after the first run-in period. A belt that is too loose slips; too tight loads the bearings. For a quote, send the part number A 24 and the quantity you need.
Dimensions
- Section
- A
- Length
- 660mm
Frequently asked questions
- What should I check on the drive before installing this belt?
- Inspect sheave grooves for wear, rust, or debris, verify alignment, and make sure shafts turn freely. Correct any issues before fitting the new belt.
- How do I confirm this is the right belt for my drive?
- Compare the marking on your old belt with the Optibelt A 24. The profile is A and the length is 660 mm. The same size is also listed under Stark A 24.
- What do you need to quote the Optibelt A 24?
- Send the part number A 24 and the quantity you need by WhatsApp or email. We will reply promptly.