Timing belt Optibelt 924-14M-170
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Omega / Omega HP
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 924-14M-170 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 924-14M-170 and any equivalents.
When a drive is down, the fastest way to identify the correct replacement is to read the marking on the back of the old belt. This page covers the Optibelt 924-14M-170, an HTD 14M timing belt with a 924 mm length and a 14 mm pitch. Use the numbers printed on your belt to confirm the match before you request a quote.
The marking on a timing belt typically shows the profile and the length, and sometimes a width or catalog code. For this belt, the profile is HTD 14M and the length is 924 mm, with a 14 mm pitch. If your old belt reads 924-14M-170, you are looking at the same size. If the marking is worn or unreadable, measure the belt and count the teeth so we can help you confirm the profile and length.
Timing belts are selected by profile, pitch and length, not by the equipment they came from. The HTD 14M profile is a synchronous belt profile, so the teeth mesh with matching pulleys to maintain timing between the shafts. A belt that is the wrong pitch or length will not seat correctly on the pulleys, even if it looks close. Always compare the full marking rather than just one number.
Once you have the marking, send the part number 924-14M-170 by WhatsApp or email. Our team replies promptly and can confirm the belt or suggest an equivalent if the exact marking is no longer readable. Include the profile and length from the old belt, and note any other numbers printed on it, so we can match the drive correctly.
Dimensions
- Profile
- HTD 14M
- Pitch
- 14mm
- Length
- 924mm
Frequently asked questions
- How do I read the marking on my old timing belt?
- Look for the profile and length printed on the back of the belt. On this belt, the marking is 924-14M-170, which indicates an HTD 14M profile with a 924 mm length. The 14 mm pitch is part of the profile.
- What if the marking on my belt is worn off?
- Measure the outside length and count the teeth if possible, then send those details along with the part number you can read. We can help confirm the HTD 14M profile and 924 mm length so you get the right belt.
- What information should I send for a quote?
- Send the full part number 924-14M-170, plus the profile and length from the old belt if you have them. A photo of the marking also helps. We reply promptly by WhatsApp or email.