V-belt Optibelt 8V 4750
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- 8V
- Series
- SK S=C Plus
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
DODGE and OPTIBELT: matching part numbers →GATES and OPTIBELT: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 8V 4750 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 8V 4750 and any equivalents.
This Optibelt 8V 4750 belt is a narrow wedge V-belt from the SK S=C Plus series. It is identified by the 8V profile and a length of 12065 mm. Use the part number to confirm the correct replacement for your drive.
Narrow wedge V-belts are common on heavy-duty industrial drives where a compact cross-section is needed to transmit power. The 8V profile and 12065 mm length are the key dimensions to check against your existing belt or drive specification. Because this is a long belt, confirm that the drive layout and take-up allowance match before ordering.
To verify fit, read the marking on the back of the old belt and compare it with the 8V profile and 12065 mm length. If the old belt is worn or the marking is unreadable, measure the outside length or check the drive documentation. The Optibelt 8V 4750 SK S=C Plus is supplied as a single belt; for drives using multiple belts, replace all belts in the set at the same time to keep load sharing even.
When you request a quote, send the part number 8V 4750 and the quantity you need. If you are unsure whether this is the right belt, include the old belt marking, the drive make and model, and the sheave diameters. Our team can help confirm the correct belt or suggest an equivalent.
Dimensions
- Section
- 8V
- Length
- 12065mm
Frequently asked questions
- How do I confirm that the Optibelt 8V 4750 is the correct belt for my drive?
- Compare the 8V profile and 12065 mm length with the marking on your old belt or with your drive documentation. If the marking is not clear, measure the old belt and check the sheave groove profile.
- Can I replace just one belt on a multi-belt drive?
- For drives that use more than one belt, it is standard practice to replace all belts in the set at the same time. This helps maintain even tension and load sharing across the drive.
- What information should I send with my quote request?
- Send the part number 8V 4750 and the quantity required. If you need help confirming the fit, also include the old belt marking, the drive make and model, and the sheave diameters.