V-belt Optibelt 8V 1800
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- 8V
- Series
- SK S=C Plus
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
GATES and OPTIBELT: matching part numbers →OPTIBELT and STARK: matching part numbers →DAYCO and OPTIBELT: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 8V 1800 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 8V 1800 and any equivalents.
This Optibelt 8V 1800 SK S=C Plus is a narrow wedge V-belt in the 8V profile, with a length of 4572 mm. It is used in heavy-duty industrial drives where a compact, high-capacity belt is required. Use the part number and the marking on the old belt to confirm the correct replacement.
Narrow wedge V-belts in the 8V profile are common on high-power drives such as large fans, compressors, crushers, mixers and process pumps. The 8V profile allows more power to be transmitted in a narrower space than a classical V-belt, which is why it is often found on drives with limited pulley width.
To confirm fit, check the belt marking for the profile and length. This belt is marked 8V 1800, which corresponds to a 4572 mm length. Compare that with the old belt before ordering. If the marking is worn or missing, measure the outside length and the top width, and note the pulley groove profile.
The same size is also listed under Stark 8V 1800 and Dayco 8V 1800. When replacing a belt on a multi-belt drive, inspect all belts and pulley grooves for wear, and replace the full set where the drive calls for matched belts.
Dimensions
- Section
- 8V
- Length
- 4572mm
Frequently asked questions
- What does the 8V 1800 marking mean on this Optibelt belt?
- The 8V indicates the belt profile, and 1800 is the length designation used by the manufacturer. The length in millimeters is 4572 mm. Always compare the marking on the old belt with the new belt before installation.
- Can I use this belt as a replacement for a worn 8V belt on my drive?
- If your drive uses an 8V profile belt with a 4572 mm length, this Optibelt 8V 1800 SK S=C Plus is the correct size. Confirm the profile and length from the old belt marking or by measuring the outside length and top width.
- What should I send to get a quote for this belt?
- Send the part number 8V 1800, the brand Optibelt, and the quantity you need. If you are unsure about the size, include a photo of the old belt marking and the pulley grooves so we can help confirm the correct belt.