V-belt Optibelt 8V 1600 RP
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- 8V
- Series
- Red Power 3 S=C Plus
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 8V 1600 RP belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 8V 1600 RP and any equivalents.
The Optibelt 8V 1600 RP is a narrow wedge V-belt from the Red Power 3 S=C Plus series, built in the 8V profile with a length of 4064 mm. When you are replacing a belt on an existing drive, matching the marking on the old belt is the fastest way to confirm you are ordering the same size.
Start with the belt you are removing. Read the marking printed on the back of the old belt and compare it against the profile and the length. On this belt the profile is 8V and the length is 4064 mm. If the old marking reads the same, you have a direct match on size.
If the marking has worn off or the belt is too damaged to read, measure or identify the drive instead. Confirm the sheave groove profile is 8V and establish the belt length the drive requires. Send us the part number you need, or the profile and length you measured, and we will confirm the belt for your application.
We carry the Optibelt 8V 1600 RP for maintenance, engineering and purchasing teams. Send the part number by WhatsApp or email and our team will respond promptly to confirm the right belt or suggest an equivalent.
Dimensions
- Section
- 8V
- Length
- 4064mm
Frequently asked questions
- How do I confirm the 8V 1600 RP is the belt I need?
- Check the marking on the back of the belt you are replacing. The 8V 1600 RP is an 8V profile belt with a length of 4064 mm. If your old belt shows the same profile and length, it is the same size.
- What if the marking on my old belt is unreadable?
- Identify the drive instead. Confirm the sheave groove is 8V and determine the belt length the drive requires, then send those details to our team. We will help confirm the correct belt.
- What information should I send to request a quote?
- Send the part number 8V 1600 RP, or the profile and length if you are working from a measurement. You can reach us by WhatsApp or email and we will reply promptly.