V-belt Optibelt 8V 1320 RP
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- 8V
- Series
- Red Power 3 S=C Plus
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 8V 1320 RP belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 8V 1320 RP and any equivalents.
When you need to replace a narrow wedge V-belt, start by reading the marking on the back of the old belt. This page covers the Optibelt 8V 1320 RP from the Red Power 3 S=C Plus series, an 8V profile belt with a length of 3353 mm. Use the marking to confirm the profile and length before you request a quote.
The marking on a belt back typically shows the profile and the length, and sometimes a manufacturer part number. For this Optibelt belt, the profile is 8V and the length is 3353 mm. If the old belt is worn or the marking is unreadable, measure the top width and the outside length to match the 8V profile and 3353 mm length. Do not rely on a partial number.
The Optibelt 8V 1320 RP is a narrow wedge V-belt from the Red Power 3 S=C Plus series. It is used in industrial drives where an 8V profile belt of this length is specified. When you contact us, send the full marking from the old belt, including the profile and length, so we can confirm the correct belt or suggest an equivalent. We carry Optibelt belts and can help you match the right part.
If the drive uses multiple belts, replace all belts in the set at the same time. Mixed or unevenly worn belts can cause vibration and uneven load. Check the sheaves for wear and alignment before installing new belts. Provide the drive details and the old belt marking when you request a quote.
Dimensions
- Section
- 8V
- Length
- 3353mm
Frequently asked questions
- How do I read the marking on an Optibelt 8V 1320 RP belt?
- The marking on the back of the belt shows the profile and length. For this belt, the profile is 8V and the length is 3353 mm. The part number 8V 1320 RP may also appear. Use these details to confirm the replacement.
- What should I send to request a quote for this belt?
- Send the full marking from the old belt, including the profile, length and any part number. For this belt, that is 8V, 3353 mm and 8V 1320 RP. Photos of the belt and the drive can also help us confirm the correct part.
- Should I replace all belts on the drive at the same time?
- Yes. If the drive uses multiple belts, replace them as a set. Mixing new and worn belts can cause uneven tension and vibration. Check sheave condition and alignment before installing the new set.