Timing belt Optibelt 8MHP 920
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Omega HP
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 8MHP 920 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 8MHP 920 and any equivalents.
The Optibelt 8MHP 920 is an Omega HP timing belt with an HTD 8M profile, a 920 mm length and an 8 mm pitch. To match it to the belt being replaced, read the marking on the back of the old belt and compare the profile and length before ordering.
The profile and length are the two values that identify this belt. HTD 8M describes the tooth profile, and 920 mm is the length. If the old belt is worn or the marking is hard to read, measure the length along the back of the belt and confirm the tooth profile against the pulleys. A belt with the same profile and length is the correct starting point for the drive.
Compare the part number on the old belt with 8MHP 920. If the numbers match, the replacement is straightforward. If the old belt carries a different number but the same HTD 8M profile and 920 mm length, send both numbers and the drive details so the team can confirm the match. Photographs of the belt marking and the pulleys help avoid errors.
When you request a quote, include the part number 8MHP 920, the quantity, and the application details. If you are replacing more than one belt on the same drive, list all the part numbers. The team replies by WhatsApp or email and can help confirm the right belt or suggest an equivalent.
Dimensions
- Profile
- HTD 8M
- Pitch
- 8mm
- Length
- 920mm
Frequently asked questions
- How do I confirm the Optibelt 8MHP 920 is the right belt for my drive?
- Check the marking on the back of the belt being replaced. The profile should be HTD 8M and the length 920 mm. If the old belt shows 8MHP 920, it is the same part number. If it shows a different number, send the marking and drive details for confirmation.
- What should I send with my quote request?
- Send the part number 8MHP 920, the quantity you need, and any details about the drive or application. If you have the old belt, include a photo of the marking. This helps the team confirm the belt or suggest an equivalent.
- Can I use this belt if the old belt has a different part number but the same profile and length?
- If the old belt has an HTD 8M profile and a 920 mm length, the 8MHP 920 is a candidate replacement. Send both part numbers and the drive details so the team can confirm the match before you order.