Timing belt Optibelt 8MHP 640

OPTIBELT 8MHP 640 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 8MHP 640 and any equivalents.

The Optibelt 8MHP 640 is an Omega HP timing belt with an HTD 8M profile, a 640 mm length and an 8 mm pitch. When you need to identify a replacement, start by reading the marking on the back of the old belt.

The marking on the back of the belt carries the part number, profile and length. On the 8MHP 640 you should see the Optibelt brand, the Omega HP series and the code 8MHP 640. This code tells you the belt is an HTD 8M profile with a 640 mm length and an 8 mm pitch. If the old belt is worn or dirty, clean the back with a cloth so the characters are legible.

Match the marking to the profile and length you need. The 8MHP 640 is an HTD 8M timing belt, so the sprocket grooves must match the 8M profile. The 640 mm length is the datum length, and the 8 mm pitch is the distance between tooth centers. If you are replacing a belt on a drive, inspect the sprockets for wear and check the alignment before installing the new belt.

Send us the part number from the old belt, along with the profile and length if you have them, to request a quote. We carry the Optibelt 8MHP 640 and can help confirm it is the right belt for your drive. If the marking is unreadable, send photos of the belt and sprockets so we can help identify the correct replacement.