Timing belt Optibelt 8MHP 1248
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Omega HP
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 8MHP 1248 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 8MHP 1248 and any equivalents.
This Optibelt 8MHP 1248 belt is an HTD 8M timing belt from the Omega HP series. It has a 1248 mm length and an 8 mm pitch. If you are replacing a belt on a synchronous drive, matching these three values to the belt you remove is the first step.
Read the marking on the back of the old belt. You are looking for the profile, the pitch and the length. This belt is HTD 8M, 8 mm pitch, 1248 mm long. If the old belt shows the same profile and the same length, the 8MHP 1248 is a direct size match. If the old marking is worn or unreadable, measure the length along the belt and count the teeth to confirm the pitch before you order.
Do not match by part number alone. A belt with the same length but a different profile will not seat correctly in the pulleys. Check the pulley grooves as well: an HTD 8M belt requires HTD 8M pulleys. If the drive runs more than one belt, replace the full set so the load stays even. Send the belt marking, the part number, or both, and our team will confirm the right belt or suggest an equivalent.
Dimensions
- Profile
- HTD 8M
- Pitch
- 8mm
- Length
- 1248mm
Frequently asked questions
- What do I need to send to get a quote for this belt?
- Send the part number 8MHP 1248, or the marking from the back of the old belt, by WhatsApp or email. If you have the profile and length, include those as well. Our team replies promptly and can help confirm the right belt or suggest an equivalent.
- How do I know this is the correct replacement belt?
- Match the profile, pitch and length to the belt you are replacing. This belt is HTD 8M profile with an 8 mm pitch and a 1248 mm length. Confirm the pulley grooves are also HTD 8M.
- Can you help if I cannot read the old belt marking?
- Yes. Send clear photos of the old belt and the pulleys, or measure the length and count the teeth. Our team can help identify the correct belt from those details.