Timing belt Optibelt 8MHP 1080
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Omega HP
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 8MHP 1080 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 8MHP 1080 and any equivalents.
When you pull a worn timing belt, the first thing to do is read the marking on its back. The Optibelt 8MHP 1080 is an Omega HP timing belt with an HTD 8M profile, a length of 1080 mm and a pitch of 8 mm. Matching that marking to a replacement starts with the part number and the profile.
The back of the belt carries the identifying string: 8MHP 1080. The 8M profile tells you the tooth geometry is HTD 8M, and the 1080 is the length in millimeters. The pitch is 8 mm. Write down the full marking before the old belt is discarded, because it is the quickest way to confirm you are looking at the same profile and length.
If the marking is worn or unreadable, check the drive for other clues. The belt is an Optibelt Omega HP timing belt, and the HTD 8M profile and 1080 mm length are the key dimensions to match. Send the part number, the profile and the length when you request a quote, and the team can help confirm the right belt or suggest an equivalent.
Dimensions
- Profile
- HTD 8M
- Pitch
- 8mm
- Length
- 1080mm
Frequently asked questions
- What should I look for on the old belt?
- Read the marking on the back of the belt. For this belt it should show 8MHP 1080. Also note the profile, HTD 8M, and the length, 1080 mm.
- What information do you need for a quote?
- Send the part number 8MHP 1080, the profile HTD 8M and the length 1080 mm. If you have the old belt, include a photo of the marking. The team can help confirm the right belt or suggest an equivalent.
- Can you help if the marking is unreadable?
- Yes. Measure or note the profile and length from the drive, and share any remaining marking. The team will work from the Optibelt part number and the HTD 8M profile to help identify the correct replacement.