Timing belt Optibelt 8M 936

OPTIBELT 8M 936 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 8M 936 and any equivalents.

The Optibelt Omega 8M 936 is a timing belt with an HTD 8M profile, a 936 mm length and an 8 mm pitch. Those three figures are what identify the belt on a drive, so they are the first thing to check against the old part.

The profile describes the tooth form and spacing that must engage the pulleys. HTD 8M sets the tooth geometry, and the 8 mm pitch is the center-to-center distance between adjacent teeth. The 936 mm length is the belt's own length figure. A belt is only correct when profile, pitch and length all match the drive, so read them off the back of the belt you are replacing rather than measuring around the outside.

If the marking is worn or the belt has already been removed, the part number is usually the fastest route. Send the code 8M 936, along with the Optibelt Omega series name, and we can confirm the belt against that data. If the number on the belt differs slightly, send a photo of the marking and the pulley area so the profile and length can be checked.

Timing belts are commonly replaced as part of a scheduled drive service. Inspect the pulleys for wear or debris and confirm the belt sits correctly in the grooves before tensioning. On drives running more than one belt, replace the set together so the load stays even across the belts.