Timing belt Optibelt 8M 848
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Omega
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 8M 848 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 8M 848 and any equivalents.
When replacing a timing belt, start by reading the marking on the back of the old belt. This Optibelt Omega belt is identified by part number 8M 848, with an HTD 8M profile and a length of 848 mm. Confirm those three details before you order.
The 8M 848 is a synchronous belt with an 8 mm pitch and a 848 mm length. The HTD 8M profile is a common toothed profile, so matching the profile and length to the belt you are removing is the first step. Check that the old belt shows the same profile and length, and that the tooth pattern and width suit the pulleys on the drive.
If the marking on the old belt is worn or unreadable, measure the length and count the teeth to confirm the profile. Send the part number 8M 848, the profile, and the length to our team by WhatsApp or email. We carry Optibelt Omega belts and can help confirm the right belt or suggest an equivalent.
Dimensions
- Profile
- HTD 8M
- Pitch
- 8mm
- Length
- 848mm
Frequently asked questions
- How do I confirm that the 8M 848 is the correct belt for my drive?
- Check the marking on the back of the belt you are replacing. It should show the profile and length. The 8M 848 has an HTD 8M profile and a length of 848 mm. If those match, it is the same size.
- What information should I send with my quote request?
- Send the part number 8M 848, or the profile and length from the old belt, along with the quantity you need. Photos of the belt marking and the drive pulleys can help us confirm the match.
- Can you help if the old belt marking is unreadable?
- Yes. Measure the length and count the teeth if possible, and send those details. We can compare them with the 8M 848 and other sizes to help you identify the correct replacement.