Timing belt Optibelt 8M 536

OPTIBELT 8M 536 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 8M 536 and any equivalents.

When you are replacing a timing belt, the fastest way to confirm the correct part is to read the marking on the back of the belt you are removing and match it to the replacement. This Optibelt Omega belt is identified by its 8M 536 code, an HTD 8M profile and a 536 mm length. Check those three items against the old belt before you order.

The belt you take off the drive usually carries its own identification on the back. Compare the profile and the length to this belt: HTD 8M profile, 536 mm length, 8 mm pitch. If the numbers on your old belt match, this is the size to quote. If the old belt is worn, glazed or the marking has rubbed off, measure the drive rather than guessing.

A belt that has run for a long time may no longer measure its original length, so do not size a replacement from a stretched belt alone. Confirm the pulley grooves suit an HTD 8M profile and that the belt path matches the 536 mm length. On drives with more than one belt, replace the set together so the load stays even across the pulleys.

If the marking is unreadable or you are unsure of the equivalent, send the part number you have, the belt profile and the length in millimeters to our team. We carry the Optibelt Omega 8M 536 and can confirm the right belt or suggest an equivalent from the information you provide.