Timing belt Optibelt 8M 3280
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Omega
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 8M 3280 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 8M 3280 and any equivalents.
The Optibelt Omega 8M 3280 is an HTD 8M timing belt with an 8 mm pitch and a 3280 mm length. We carry it for drives that run on the HTD 8M profile, and the fastest way to confirm it is the right one is to read the marking off the belt you are replacing.
When you pull the old belt, look at the back of it. The profile and the length are the two numbers that have to line up, and on this belt those are HTD 8M and 3280 mm. If the marking on your belt reads 8M 3280, this is the same size. If it reads a different length, send that number instead and we will match it.
Check the pulleys as well while the belt is off. Worn or damaged teeth will shorten the life of any new timing belt, and a drive that has been running misaligned will show it on the belt edges. If the old belt is cracked, glazed or missing teeth, that is a sign the drive needs attention before the replacement goes on.
Dimensions
- Profile
- HTD 8M
- Pitch
- 8mm
- Length
- 3280mm
Frequently asked questions
- How do I confirm this belt matches the one I am replacing?
- Read the marking on the back of the old belt. The profile and length on this belt are HTD 8M and 3280 mm. If your belt carries those, it is the same size. If it carries a different length or profile, send us what it says and we will help you find the match.
- What do I need to send for a quote?
- Send the part number 8M 3280, or send a photo of the marking on the old belt along with the quantity you need. If you have the pulley tooth count and the center distance, include those as well so we can confirm the fit.
- Should I replace anything else at the same time?
- Inspect the pulleys for worn teeth, the tensioner if the drive has one, and the belt edges for uneven wear. If the drive runs more than one belt, replacing them as a set keeps the load even across the drive.