Timing belt Optibelt 8M 1248
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Omega
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 8M 1248 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 8M 1248 and any equivalents.
The Optibelt 8M 1248 is an Omega timing belt with an HTD 8M profile and a 1248 mm length. The 8 mm pitch and HTD profile identify the tooth form and spacing, while the length sets the center distance the belt is built for. This is the belt to specify when the drive calls for an HTD 8M synchronous belt in that length.
Reading the part number against the drive is the first check. HTD 8M describes the tooth profile; 1248 mm is the datum length. If the old belt is marked 8M 1248, this is the matching size. Confirm the profile and length before ordering, since a belt that is close in length but different in profile will not run correctly.
Timing belts are often replaced as part of scheduled drive maintenance. Inspect the pulleys for wear, check alignment, and set tension to the drive manufacturer's specification. If the drive uses more than one belt, replace the full set so the load stays even across the belts.
To request a quote, send the part number 8M 1248, the profile HTD 8M, and the length 1248 mm by WhatsApp or email. If you are unsure whether this is the right belt for your drive, include the belt marking and any details from the old belt, and the team can confirm the correct belt or suggest an equivalent.
Dimensions
- Profile
- HTD 8M
- Pitch
- 8mm
- Length
- 1248mm
Frequently asked questions
- What do the profile and length on the 8M 1248 tell me?
- HTD 8M is the tooth profile, and 1248 mm is the belt length. The 8 mm pitch is the distance between tooth centers. Together these define the size of the belt.
- How do I confirm this is the right belt for my drive?
- Compare the marking on the old belt with 8M 1248. If the profile and length match, it is the same size. If you are unsure, send the old belt details for confirmation.
- What should I send to get a quote?
- Send the part number 8M 1248, the profile HTD 8M, and the length 1248 mm by WhatsApp or email. The team replies promptly and can help confirm the right belt or suggest an equivalent.