Timing belt Optibelt 8M 1168
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Omega
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 8M 1168 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 8M 1168 and any equivalents.
The Optibelt Omega 8M 1168 is a timing belt with an HTD 8M profile, an 8 mm pitch, and a 1168 mm length. Before you install it, check the drive and sheaves so the new belt runs correctly.
Inspect the sheaves for worn grooves, burrs, or debris, and confirm they are aligned. Verify that the sheave teeth match the HTD 8M profile and that the pitch diameter is correct for the 8 mm pitch. Check the bearings and shafts for play, and make sure the tensioner moves freely.
Measure the old belt's length and compare it with the 1168 mm length of the Optibelt Omega 8M 1168. Read the marking on the back of the old belt to confirm the profile and part number. If the old belt is not readable, send us the drive details and we can help confirm the right belt or suggest an equivalent.
After installation, recheck alignment and tension. Keep the drive area clean and inspect the belt regularly for wear. For a quote, send the part number 8M 1168 by WhatsApp or email, and our team will reply promptly.
Dimensions
- Profile
- HTD 8M
- Pitch
- 8mm
- Length
- 1168mm
Frequently asked questions
- How do I confirm the Optibelt Omega 8M 1168 is the right belt for my drive?
- Check the old belt's marking for the HTD 8M profile and 1168 mm length. Also confirm the sheave profile and pitch match. If you are unsure, send us the drive details and we can help confirm the right belt or suggest an equivalent.
- What should I inspect on the drive before fitting this timing belt?
- Inspect the sheaves for wear, burrs, or debris, and verify alignment. Check that the sheave teeth match the HTD 8M profile and that bearings and tensioner are in good condition.
- What information do I need to request a quote for the 8M 1168?
- Send the part number 8M 1168 by WhatsApp or email. If you have the old belt, include the marking on the back and any drive details. Our team replies promptly.