Timing belt Optibelt 8M 1120

OPTIBELT 8M 1120 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 8M 1120 and any equivalents.

This Optibelt Omega timing belt is identified by its HTD 8M profile and 1120 mm length, with an 8 mm pitch. It is a synchronous belt for drives where tooth engagement, not friction, carries the load.

HTD 8M synchronous belts are common on industrial drives that must stay in step: cam and auxiliary drives on process equipment, pump and compressor drives, and positioning axes on production machinery. If your drive runs a wide 8 mm pitch belt and the application needs timed motion rather than slip, this profile is the correct family to check.

To confirm fit, read the marking on the back of the old belt and match both the profile and the length. The belt you are replacing should show an HTD 8M profile and a length of 1120 mm; the 8 mm pitch is set by the profile. Count the teeth on the old belt and compare with the drive pulleys, and check that the pulleys are HTD 8M pulleys with matching pitch.

For a quote, send the part number 8M 1120, the belt type, and the profile and length from the old belt. If the marking is worn, send the drive make and model, the pulley part numbers or tooth counts, and a photo of the belt and the drive. We carry Optibelt belts and can help confirm the right belt or suggest an equivalent.