Timing belt Optibelt 85 / 8M 7200 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 85 / 8M 7200 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 85 / 8M 7200 AFX and any equivalents.
The Optibelt 85 / 8M 7200 AFX is an Alpha Flex timing belt with an HTD 8M profile, a 7200 mm length and an 8 mm pitch. When you are replacing a belt, this page gives you the exact identification data to compare against the belt on the drive. We carry this belt and quote it by part number.
To match it to the belt being replaced, read the marking on the back of the old belt and compare each element: the part number 85 / 8M 7200 AFX, the HTD 8M profile, the 7200 mm length and the 8 mm pitch. The profile and the length are the two dimensions that must agree with the drive. If the old belt is worn or the marking is unreadable, measure the length and identify the profile from the pulley grooves before ordering.
A timing belt replacement should include a look at the drive: check the pulleys for wear or damage, confirm the belt tracks correctly and verify that the tension is set to the drive manufacturer's specification. If the drive uses more than one belt, replace the set together so the load stays even across the belts.
For a quote, send the part number 85 / 8M 7200 AFX, the quantity and any details from the old belt or drive. If you are unsure of the exact belt, send the marking from the back of the belt or the drive details and our team can help confirm the right belt or suggest an equivalent.
Dimensions
- Profile
- HTD 8M
- Pitch
- 8mm
- Length
- 7200mm
Frequently asked questions
- How do I match the Optibelt 85 / 8M 7200 AFX to the belt I am replacing?
- Compare the part number, the HTD 8M profile, the 7200 mm length and the 8 mm pitch on the old belt with the data for this belt. The profile and length must match the drive.
- What should I send to request a quote for this belt?
- Send the part number 85 / 8M 7200 AFX and the quantity you need. If you are replacing an unmarked belt, include the belt marking or the drive details so we can help confirm the right belt.
- Should I replace more than one belt at the same time?
- If the drive uses multiple belts, replace them as a set so the load is shared evenly and the drive runs correctly.