Timing belt Optibelt 85 / 8M 1200 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 85 / 8M 1200 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 85 / 8M 1200 AFX and any equivalents.
The Optibelt 85 / 8M 1200 AFX is an Alpha Flex timing belt with an HTD 8M profile, a 1200 mm length and an 8 mm pitch. When you are replacing a timing belt, match these three markings to the belt on the drive before you order.
Start with the belt you are removing. Read the marking on the back: it should show the profile, the length and the part number. The 85 / 8M 1200 AFX carries the HTD 8M profile, a 1200 mm length and an 8 mm pitch, so those are the values to confirm against the old belt. If the marking is worn or unreadable, measure the length and check the profile against the pulley grooves.
The profile and the length are what locate the correct belt. HTD 8M describes the tooth profile, and 1200 mm is the length; the 8 mm pitch is the distance between tooth centers. A belt with the same profile but a different length will not fit the drive, and a belt with the same length but a different profile will not seat in the pulleys.
Send the part number 85 / 8M 1200 AFX, or the marking from the belt being replaced, by WhatsApp or email and the team will confirm the belt or suggest an equivalent. Photographs of the back marking and the pulleys help when the numbers are difficult to read.
Dimensions
- Profile
- HTD 8M
- Pitch
- 8mm
- Length
- 1200mm
Frequently asked questions
- How do I match the Optibelt 85 / 8M 1200 AFX to the belt I am replacing?
- Compare the profile, length and pitch. This belt is HTD 8M with a 1200 mm length and an 8 mm pitch. The marking on the back of the old belt should show the same values.
- What should I send to request a quote?
- Send the part number 85 / 8M 1200 AFX, or the full marking from the belt being replaced, by WhatsApp or email. If the marking is unreadable, include the profile and length you measured.
- Can the team help if the marking on my old belt is worn?
- Yes. Send photographs of the belt and the pulleys along with any readable numbers, and the team will help confirm the correct belt or suggest an equivalent.