Timing belt Optibelt 85 / 8M 11200 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 85 / 8M 11200 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 85 / 8M 11200 AFX and any equivalents.
This Optibelt Alpha Flex timing belt is identified by the code 85 / 8M 11200 AFX. It uses the HTD 8M profile with an 8 mm pitch and a 11200 mm length. Use this page to confirm the belt for your drive and request a quote.
The 85 / 8M 11200 AFX is a synchronous belt from the Optibelt Alpha Flex series. Its HTD 8M profile and 8 mm pitch suit drives that require positive engagement between the belt and pulleys. The 11200 mm length is the reference dimension to match against your existing belt or drive specification.
To confirm fit, read the marking on the back of the belt you are replacing and compare the profile, pitch and length. The code 85 / 8M 11200 AFX should match the belt you remove. If the marking is worn or unreadable, measure the length and check the pulley groove profile before ordering.
When you request a quote, send the part number 85 / 8M 11200 AFX and the quantity you need. If you are replacing a belt on a drive with multiple belts, include the position and any other markings from the old belt. Our team can confirm the belt or suggest an equivalent based on the information you provide.
Dimensions
- Profile
- HTD 8M
- Pitch
- 8mm
- Length
- 11200mm
Frequently asked questions
- How do I confirm that the Optibelt 85 / 8M 11200 AFX fits my drive?
- Compare the profile, pitch and length on the back of your existing belt with the HTD 8M profile, 8 mm pitch and 11200 mm length of the 85 / 8M 11200 AFX. If the markings are not readable, measure the belt length and check the pulley groove profile.
- What information should I send with my quote request?
- Send the part number 85 / 8M 11200 AFX and the quantity required. If you are replacing belts on a multi-belt drive, include the position and any other markings from the old belt so we can confirm the correct item.
- Can you help if the belt marking is worn off?
- Yes. Provide the drive details and any measurements you can take, such as the length and pulley profile. Our team will help confirm the right belt or suggest an equivalent.