Timing belt Optibelt 85 / 14M 9800 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 85 / 14M 9800 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 85 / 14M 9800 AFX and any equivalents.
The Optibelt 85 / 14M 9800 AFX is an Alpha Flex timing belt with an HTD 14M profile, a 9800 mm length and a 14 mm pitch. When you are replacing a belt, the first step is to match the profile and length on the belt you are taking off. This page gives you the reference data to confirm that match before you request a quote.
Start with the marking on the back of the old belt. The profile should read HTD 14M, and the length should be 9800 mm. The 14 mm pitch is the distance between tooth centers, so it must also agree with the pulleys on the drive. If the old belt is worn or the marking is unreadable, measure the outside length and count the teeth to confirm the 9800 mm length.
Use the part number 85 / 14M 9800 AFX when you request a quote. We carry the Optibelt Alpha Flex line, and this belt is built to the HTD 14M profile. Send the part number by WhatsApp or email, and the team will confirm it is the right belt for your drive or suggest an equivalent if needed.
A timing belt is a synchronous belt, so the teeth must engage the pulley grooves correctly. Check the pulleys for wear, alignment and tooth damage before installing a new belt. If the drive uses more than one belt, replace them as a set so the load stays even.
Dimensions
- Profile
- HTD 14M
- Pitch
- 14mm
- Length
- 9800mm
Frequently asked questions
- How do I confirm this is the belt I need?
- Compare the profile and length on the back of the old belt. It should read HTD 14M and 9800 mm. The 14 mm pitch must match the pulley grooves. If the marking is gone, measure the length and count the teeth.
- What information should I send with my quote request?
- Send the part number 85 / 14M 9800 AFX, along with the profile and length from the old belt if you have them. Photos of the belt marking and the drive can help the team confirm the match.
- Can you help if this exact belt is not the right one?
- Yes. If the profile or length does not match your drive, send the details of the belt being replaced. The team will help identify the correct belt or suggest an equivalent.