Timing belt Optibelt 85 / 14M 9394 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 85 / 14M 9394 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 85 / 14M 9394 AFX and any equivalents.
This Optibelt Alpha Flex timing belt is identified by the code 85 / 14M 9394 AFX. It uses the HTD 14M profile with a 14 mm pitch and a length of 9394 mm. It is a synchronous belt intended for drives where the belt teeth mesh with matching pulleys to transmit motion without slip.
HTD 14M timing belts are commonly found on high-torque industrial drives such as those on large pumps, compressors, mixers and process machinery. The 14 mm pitch and 9394 mm length make this a long belt for a substantial drive layout. The Alpha Flex construction is suited to applications where the belt must run smoothly around the pulleys.
To confirm fit, read the marking on the back of the old belt and compare it with 85 / 14M 9394 AFX. Check that the profile is HTD 14M, the pitch is 14 mm and the length is 9394 mm. Also verify the pulley tooth profile matches HTD 14M and that the belt width matches the pulley groove width.
If the marking is worn or unreadable, measure the belt length and count the teeth, then send those details along with the pulley tooth count and the drive arrangement. Our team can help confirm the correct belt or suggest an equivalent.
Dimensions
- Profile
- HTD 14M
- Pitch
- 14mm
- Length
- 9394mm
Frequently asked questions
- How do I confirm this Optibelt timing belt fits my drive?
- Check the old belt marking for 85 / 14M 9394 AFX and verify the profile is HTD 14M, the pitch is 14 mm and the length is 9394 mm. Also confirm the pulleys are HTD 14M and the belt width matches the pulley grooves.
- What information should I send for a quote?
- Send the part number 85 / 14M 9394 AFX, the belt marking if legible, and the pulley tooth counts. If the marking is not readable, provide the measured length, tooth count and drive details.
- Can you help if the marking on my belt is worn off?
- Yes. Send photos of the belt and pulleys, the measured length, the tooth count and the equipment details. We will help identify the correct Optibelt belt or a suitable equivalent.