Timing belt Optibelt 85 / 14M 8750 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 85 / 14M 8750 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 85 / 14M 8750 AFX and any equivalents.
This Optibelt Alpha Flex timing belt is identified by the code 85 / 14M 8750 AFX. It uses the HTD 14M profile with a 14 mm pitch and an 8750 mm length. Use these three values to confirm the belt matches your drive before you request a quote.
HTD 14M synchronous belts are common on high-torque industrial drives where positive engagement is required. The 14 mm pitch and 8750 mm length make this a long belt, so it is typically found on large, slow-turning equipment rather than compact drives. If you are replacing a belt on a drive of this type, check the old belt's back marking against the code 85 / 14M 8750 AFX and confirm the profile and length match.
To confirm fit, measure or read the length as 8750 mm and verify the profile is HTD 14M with a 14 mm pitch. Also check the belt width and the number of teeth on both pulleys against your drive documentation. A belt that matches in profile and length but not in width will not run correctly, so include the width when you send your request.
When you contact us, send the part number 85 / 14M 8750 AFX along with the belt width and any markings from the old belt. If the exact code is not clear, we can help confirm the right belt or suggest an equivalent from the Optibelt Alpha Flex line.
Dimensions
- Profile
- HTD 14M
- Pitch
- 14mm
- Length
- 8750mm
Frequently asked questions
- How do I confirm this belt fits my drive?
- Check the old belt's marking for the code 85 / 14M 8750 AFX, then verify the profile is HTD 14M, the pitch is 14 mm, and the length is 8750 mm. Also confirm the belt width and pulley tooth counts against your drive documentation.
- What information should I send with my quote request?
- Send the part number 85 / 14M 8750 AFX, the belt width, and any markings from the old belt. If you have the pulley details, include those as well so we can help confirm the right belt.
- Can you help if I cannot read the old belt marking?
- Yes. Send the part number you have, the belt width, and photos of the old belt and drive if possible. We can help confirm the right belt or suggest an equivalent from the Optibelt Alpha Flex line.