Timing belt Optibelt 85 / 14M 7798 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 85 / 14M 7798 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 85 / 14M 7798 AFX and any equivalents.
The Optibelt 85 / 14M 7798 AFX is an Alpha Flex timing belt in the HTD 14M profile, with a 7798 mm length and a 14 mm pitch. Before you fit it, inspect the drive: worn sheave grooves and misalignment will shorten the life of any new belt.
Start with the sheaves. Check the groove flanks for wear, scoring or a hooked profile, since a worn groove lets the belt sit low and run slack. Confirm the sheaves are clean, free of buildup in the grooves and correctly aligned to each other. Verify that the shafts turn freely and that the bearings show no play or roughness.
Then look at the rest of the drive. Check the tensioner and idler for smooth rotation and worn bearings, and confirm the structure and guards are secure. Any belt that failed early usually points to one of these items, so correcting it before installation protects the replacement.
The belt is identified by its marking: 85 / 14M 7798 AFX, HTD 14M profile, 7798 mm length, 14 mm pitch. Send that part number and the quantity you need by WhatsApp or email, and we will confirm the correct belt or suggest an equivalent.
Dimensions
- Profile
- HTD 14M
- Pitch
- 14mm
- Length
- 7798mm
Frequently asked questions
- What do I need to send to get a quote for this belt?
- Send the part number 85 / 14M 7798 AFX and the quantity you need by WhatsApp or email. If you are unsure of the number, send the marking on the back of the old belt and the drive details.
- What should I check on the drive before fitting this belt?
- Inspect the sheave grooves for wear and scoring, confirm the sheaves are aligned, and check the tensioner and idler bearings for smooth rotation. Worn components should be corrected before the new belt goes on.
- What are the profile and length of this belt?
- It is an HTD 14M profile timing belt with a 7798 mm length and a 14 mm pitch, part number 85 / 14M 7798 AFX.