Timing belt Optibelt 85 / 14M 5950 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 85 / 14M 5950 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 85 / 14M 5950 AFX and any equivalents.
The Optibelt 85 / 14M 5950 AFX is a timing belt from the Alpha Flex series, built on the HTD 14M profile with a 5950 mm length and a 14 mm pitch. Before you fit it, spend time on the drive itself: worn sprockets, misalignment and incorrect tension will shorten the life of any new synchronous belt.
Start with the sprockets. Check tooth flanks for wear, hooking or debris packed in the grooves, and confirm the teeth are not worn to a point where the new belt cannot seat correctly. Inspect flanges for bends or rubbing, and check shaft bearings for play that would let the pulleys move under load. A belt replaced onto a worn drive will not run true.
Confirm alignment next. Set straightedge or laser across both sprocket faces and correct parallel and angular misalignment before tensioning. On the Optibelt 85 / 14M 5950 AFX, the HTD 14M profile and 5950 mm length mean the belt spans a long center distance, so small alignment errors translate into edge wear and tracking problems. Clean the grooves and remove any oil or contamination from the pulley faces.
When you are ready to order, send the part number 85 / 14M 5950 AFX, the profile HTD 14M, the length 5950 mm and the pitch 14 mm by WhatsApp or email. Our team replies promptly and can help confirm the correct belt or suggest an equivalent based on the drive details you provide.
Dimensions
- Profile
- HTD 14M
- Pitch
- 14mm
- Length
- 5950mm
Frequently asked questions
- What are the profile, length and pitch of this belt?
- The Optibelt 85 / 14M 5950 AFX is an HTD 14M profile timing belt with a 5950 mm length and a 14 mm pitch.
- What should I check on the drive before fitting this belt?
- Inspect sprocket tooth flanks for wear and debris, check flanges and bearings for play, and verify parallel and angular alignment of the sprockets before tensioning the belt.
- What information should I send for a quote?
- Send the part number 85 / 14M 5950 AFX along with the profile HTD 14M, the length 5950 mm and the pitch 14 mm. Include any drive details that will help us confirm the correct belt.