Timing belt Optibelt 85 / 14M 3304 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 85 / 14M 3304 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 85 / 14M 3304 AFX and any equivalents.
The Optibelt 85 / 14M 3304 AFX is an Alpha Flex timing belt with an HTD 14M profile and a 3304 mm length. Before you fit it, inspect the drive and the sheaves, because worn or misaligned components will shorten the life of any new belt. We carry this belt and quote it by part number.
Start with the sheaves. Check the grooves for wear, corrosion and embedded debris, and confirm the teeth are not hooked or flattened. Verify that the sheaves are aligned and that the bearings turn freely. A drive that is out of alignment or has damaged grooves will not run a new timing belt correctly, no matter how good the belt is.
Then check the belt itself against the marking on the back. This belt is marked 85 / 14M 3304 AFX, and the profile is HTD 14M with a 14 mm pitch and a 3304 mm length. If the old belt is worn, glazed, cracked or missing teeth, replace it. If the drive runs more than one belt, fit a matched set rather than mixing new and used belts.
To request a quote, send the part number 85 / 14M 3304 AFX by WhatsApp or email. If you are unsure whether this is the correct belt for your drive, include the profile and length from the old belt and a photo of the back marking. Our team will confirm the belt or suggest an equivalent.
Dimensions
- Profile
- HTD 14M
- Pitch
- 14mm
- Length
- 3304mm
Frequently asked questions
- What should I check on the drive before fitting this belt?
- Inspect the sheaves for groove wear, corrosion and debris, confirm the sheaves are aligned, and check that the bearings turn freely. Correct any misalignment or damaged components before you fit the new belt.
- How do I identify this belt on the machine?
- Look for the marking on the back of the belt: 85 / 14M 3304 AFX. The profile is HTD 14M, the pitch is 14 mm and the length is 3304 mm.
- What do I need to send for a quote?
- Send the part number 85 / 14M 3304 AFX by WhatsApp or email. If you are not certain it is the right belt, include the profile and length from the old belt and a photo of the back marking.