Timing belt Optibelt 85 / 14M 2996 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 85 / 14M 2996 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 85 / 14M 2996 AFX and any equivalents.
The Optibelt 85 / 14M 2996 AFX is an Alpha Flex timing belt in the HTD 14M profile, with a 2996 mm length and a 14 mm pitch. Before you fit it, take the time to inspect the drive and its sheaves. A new belt on worn or misaligned components will not run the way it should.
Check the sheaves for wear in the grooves, chips, corrosion and buildup of debris. Confirm they are aligned to each other and that the bearings turn freely without play. Look at the shaft and any tensioner or idler in the drive, and correct what you find before the belt goes on.
The marking on the back of the old belt is the fastest way to confirm what you are replacing. Read the profile and the length, then match them against the 85 / 14M 2996 AFX. If the back of the belt is worn or the print has rubbed off, measure the length and identify the profile from the pulley grooves instead.
When you are ready to order, send the part number 85 / 14M 2996 AFX by WhatsApp or email. If the belt on the machine carries a different number, send that marking and the drive details, and our team will help confirm the right belt or suggest an equivalent.
Dimensions
- Profile
- HTD 14M
- Pitch
- 14mm
- Length
- 2996mm
Frequently asked questions
- What should I check on the drive before fitting this belt?
- Inspect the sheaves for groove wear, chips and buildup, confirm alignment, and check that bearings and any tensioner or idler turn freely. Correcting these points first protects the new belt.
- How do I confirm this is the right belt for my drive?
- Read the marking on the back of the belt you are removing and compare the profile and length with the HTD 14M profile and 2996 mm length of the 85 / 14M 2996 AFX. If the marking is unreadable, measure the length and identify the profile from the pulley grooves.
- How do I request a quote?
- Send the part number 85 / 14M 2996 AFX by WhatsApp or email. If you are unsure of the number, send the marking from the old belt and the drive details, and our team will reply promptly.