Timing belt Optibelt 85 / 14M 2702 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 85 / 14M 2702 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 85 / 14M 2702 AFX and any equivalents.
The Optibelt 85 / 14M 2702 AFX is an Alpha Flex timing belt with an HTD 14M profile, a 2702 mm length and a 14 mm pitch. If you are replacing a belt on a driven machine, the most reliable way to match it is to read the marking on the back of the old belt and compare each element to this listing.
Start with the profile and the length. The HTD 14M profile and the 2702 mm length are the two dimensions that decide whether this belt will sit correctly in the pulleys and maintain the right center distance. The 14 mm pitch is the distance from one tooth to the next, so it must match the pulley groove. Confirm all three against the old belt before you order.
A belt that has run for a long time can be hard to identify by eye. The marking on the back is the best reference, and it should read 85 / 14M 2702 AFX or the equivalent Optibelt Alpha Flex designation. If the marking is worn away, measure the length along the pitch line and count the teeth to confirm the 14M profile. The part number on this page is the exact identifier we use to quote.
When you request a quote, send the full part number 85 / 14M 2702 AFX and the quantity you need. If you are also replacing the pulleys or the tensioner, include those details so we can check the drive as a whole. We carry Optibelt belts and can confirm the right belt or suggest an equivalent from the information you provide.
Dimensions
- Profile
- HTD 14M
- Pitch
- 14mm
- Length
- 2702mm
Frequently asked questions
- How do I confirm this is the right belt for my drive?
- Check the marking on the back of the belt you are replacing. It should match the profile HTD 14M, the length 2702 mm and the pitch 14 mm shown here. If the marking is unreadable, measure the old belt and compare it to these dimensions.
- What information should I send with my quote request?
- Send the part number 85 / 14M 2702 AFX, the quantity, and any details about the pulleys or the drive. Photos of the old belt marking are helpful if you are unsure.
- Can you help if the marking on my old belt is worn off?
- Yes. Send us the dimensions you can measure and any drive details. We will help confirm whether this Optibelt Alpha Flex belt matches your application.