Timing belt Optibelt 85 / 14M 1512 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 85 / 14M 1512 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 85 / 14M 1512 AFX and any equivalents.
The Optibelt 85 / 14M 1512 AFX is a timing belt in the Alpha Flex series with an HTD 14M profile, a 1512 mm length and a 14 mm pitch. When you are replacing a belt on a driven machine, the fastest way to confirm the correct part is to match the marking on the old belt to these three values. We carry this belt and quote it by part number.
Start with the belt you are removing. Read the profile, length and pitch from the back of the old belt and compare them to the HTD 14M profile, 1512 mm length and 14 mm pitch of the 85 / 14M 1512 AFX. If the old marking is worn or unreadable, measure the length along the belt and check the tooth pitch against the 14 mm value. The profile and length must both agree before you order.
If the old belt carries a different brand or part number but the same HTD 14M profile and 1512 mm length, this Optibelt Alpha Flex belt is the size to quote. Send the part number 85 / 14M 1512 AFX, or send the full marking from the old belt, and our team will confirm it against your data. We can also help if you need to verify the profile from a photo of the old belt.
For drives that run more than one belt, replace all belts in the set at the same time so the load stays even across the drive. Note the condition of the pulleys and the alignment of the shafts while the belt is off. If you are unsure whether this is the correct replacement, send the machine details and the old belt marking and we will review it with you.
Dimensions
- Profile
- HTD 14M
- Pitch
- 14mm
- Length
- 1512mm
Frequently asked questions
- How do I match the 85 / 14M 1512 AFX to the belt I am replacing?
- Compare the profile, length and pitch on the old belt to the HTD 14M profile, 1512 mm length and 14 mm pitch of this Optibelt belt. If the old marking is readable, the profile and length are usually enough to confirm the match. If it is not, send us the marking or a photo and we will help you check it.
- What information should I send to request a quote?
- Send the part number 85 / 14M 1512 AFX, or the full marking from the belt you are replacing, including the profile, length and pitch. If you have the machine make and model, include that as well. We reply by WhatsApp or email and can confirm the belt or suggest an equivalent.
- Should I replace more than one belt at a time?
- On a drive that uses a set of belts, replace the full set together. Mixing a new belt with worn belts can cause uneven loading. While the belts are off, inspect the pulleys and check shaft alignment before you install the new set.