Timing belt Optibelt 85 / 14M 10094 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 85 / 14M 10094 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 85 / 14M 10094 AFX and any equivalents.
Replacing a timing belt starts with matching the marking on the belt you are removing. This Optibelt Alpha Flex belt is identified by the code 85 / 14M 10094 AFX, an HTD 14M profile and a 10094 mm length. Send that code to MR Industrial Accessories and we will quote the exact belt for your drive.
The HTD 14M profile and 14 mm pitch define how the belt seats in the pulleys, while the 10094 mm length sets the center distance. When you read the old belt, confirm all three: profile, pitch and length. If the back of the belt is worn or the print is gone, measure the length and count the teeth so we can cross-check the code you send.
Before ordering, inspect the pulleys for worn grooves, debris or misalignment, since these shorten belt life. On drives with more than one belt, replace the full set so the load stays even. Keep the old belt as a reference until the new one is fitted and tensioned to the drive manufacturer's specification.
To request a quote, send the full code 85 / 14M 10094 AFX, the quantity, and any drive details you have. If you are unsure whether this is the correct belt, include photos of the old belt marking and the pulley. Our team replies by WhatsApp or email and can confirm the right belt or suggest an equivalent.
Dimensions
- Profile
- HTD 14M
- Pitch
- 14mm
- Length
- 10094mm
Frequently asked questions
- How do I confirm this is the belt I need?
- Compare the code on your old belt with 85 / 14M 10094 AFX. Check that the profile is HTD 14M, the pitch is 14 mm and the length is 10094 mm. If the marking is unreadable, send photos and measurements and we will help you match it.
- Should I replace more than one belt at a time?
- On a multi-belt drive, replace all belts in the set together so they share the load evenly. Mixing a new belt with worn belts can cause the new one to take more than its share and fail early.
- What information do you need for a quote?
- Send the part number 85 / 14M 10094 AFX, the quantity you need, and any drive or equipment details. If you are unsure of the part number, include clear photos of the old belt and the pulleys.