V-belt Optibelt 8 x 560 Li
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Series
- VB S=C Plus
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 8 x 560 Li belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 8 x 560 Li and any equivalents.
This is an Optibelt VB S=C Plus classical V-belt with an 8 profile and a 560 mm length. It is a wrapped classical V-belt built for the constant-speed drives found on light industrial machinery and shop equipment. Confirm the profile and length against your drive before ordering.
Classical V-belts such as this one suit drives that run at a fixed ratio on fans, pumps, blowers, compressors and similar equipment. On these drives the belt rides in a pulley groove sized to the section, so the profile has to match the sheave and the length has to match the center distance and pulley diameters.
To confirm fit, read the marking on the back of the old belt and compare it to the profile and length shown here. Check the pulley grooves for wear, glazing or a polished floor, and check sheave alignment and belt tension while you have the drive open. A worn groove can let a new belt sit too low and slip.
If the marking is worn off or the drive has been modified, send the pulley diameters, the center distance and the belt cross-section for a fit check. We can help confirm the right belt or suggest an equivalent when you send the part number by WhatsApp or email.
Dimensions
- Section
- 8
- Length
- 560mm
Frequently asked questions
- How do I confirm this belt fits my drive?
- Read the marking on the back of the belt you are replacing and match the profile and length to the 8 profile and 560 mm length shown here. Also check that the pulley grooves are sized for the same section.
- What should I send for a quote?
- Send the part number and the quantity you need by WhatsApp or email. If you are unsure of the number, send the marking on the old belt along with the pulley diameters and center distance.
- Can you help if the marking on my old belt is unreadable?
- Yes. Send the pulley diameters, the center distance and the belt cross-section, and the team can help confirm the right belt or suggest an equivalent.