Timing belt Optibelt 75 T5 / 6800 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 75 T5 / 6800 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 75 T5 / 6800 AFX and any equivalents.
The Optibelt 75 T5 / 6800 AFX is an Alpha Flex timing belt built on the T5 profile. It has a 6800 mm length and a 5 mm pitch. This page covers what those two figures tell you before you order.
Profile and length are the two numbers that decide whether a timing belt fits your drive. The T5 profile fixes the tooth shape and spacing the pulleys must match, and the 5 mm pitch is the center-to-center distance between adjacent teeth. The 6800 mm length is the belt's own length figure. If your drive was built around T5 pulleys, this belt is the one to check against your old part.
The cleanest way to confirm a match is to read the marking on the back of the belt you are replacing and compare it with 75 T5 / 6800 AFX. Where the marking is worn off, measure the old belt and count the teeth, then send those figures to us. We carry Optibelt Alpha Flex and can confirm the right belt or suggest an equivalent from what we supply.
When you request a quote, include the part number 75 T5 / 6800 AFX, the quantity, and the equipment or drive it goes on. If you are replacing more than one belt on the same drive, list every position so we can quote them together. Send it by WhatsApp or email and our team will reply promptly.
Dimensions
- Profile
- T5
- Pitch
- 5mm
- Length
- 6800mm
Frequently asked questions
- What do the T5 profile and 5 mm pitch mean for fit?
- They define the tooth geometry. The T5 profile and 5 mm pitch must match the pulleys on your drive, so confirm both against the belt you are replacing.
- How do I confirm this is the right belt?
- Read the marking on the back of the old belt and compare it with 75 T5 / 6800 AFX. If the marking is gone, measure the old belt and count its teeth, then send those figures to us.
- What should I send with my quote request?
- Send the part number 75 T5 / 6800 AFX, the quantity you need, and the equipment or drive it runs on. If several belts are being replaced on the same drive, list each position.