Timing belt Optibelt 75 T5 / 2000 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 75 T5 / 2000 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 75 T5 / 2000 AFX and any equivalents.
The Optibelt 75 T5 / 2000 AFX is an Alpha Flex timing belt with a T5 profile, a 2000 mm length and a 5 mm pitch. Before you fit it, inspect the drive and the sheaves so the new belt runs on a clean, true path.
Start with the sheaves. Check the tooth flanks for wear, look for corrosion or debris in the grooves, and confirm each sheave turns freely without play or noise. A worn or damaged sheave will shorten the life of any timing belt, so correct it before installation rather than after.
Then check alignment across the drive. Sheaves should sit square to each other and the belt should track straight, without riding against a flange. Confirm the tensioning arrangement moves freely and that the belt path is clear of obstructions, sharp edges and sources of heat or contamination.
The belt itself is marked 75 T5 / 2000 AFX, so you can match it against the belt you are removing. If the marking is worn or the drive has been modified, send us the part number and the profile and length from the belt, and we will confirm the T5, 2000 mm, 5 mm pitch specification for your quote.
Dimensions
- Profile
- T5
- Pitch
- 5mm
- Length
- 2000mm
Frequently asked questions
- What are the profile and length of this Optibelt belt?
- It is a T5 profile timing belt with a 2000 mm length and a 5 mm pitch, supplied as the 75 T5 / 2000 AFX in the Alpha Flex series.
- What should I check on the drive before fitting it?
- Inspect the sheave grooves for wear, corrosion and debris, confirm the sheaves turn freely, and check that the drive is aligned and the belt path is clear.
- How do I request a quote?
- Send the part number 75 T5 / 2000 AFX by WhatsApp or email. If the old belt marking is unreadable, include the profile and length so we can confirm the correct belt.