Timing belt Optibelt 75 T5 / 10600 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 75 T5 / 10600 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 75 T5 / 10600 AFX and any equivalents.
This Optibelt Alpha Flex timing belt is identified by its T5 profile and 10600 mm length. The 5 mm pitch and the 10600 mm length are the two dimensions that determine whether it fits your drive. Use the part number 75 T5 / 10600 AFX when requesting a quote.
The T5 profile is a metric timing belt profile with a 5 mm pitch. That pitch is the distance from one tooth center to the next, and it must match the pulley grooves exactly. The 10600 mm length is the belt's datum length, so it sets the center distance and the number of teeth in mesh on your pulleys. A belt with the same profile but a different length will not run correctly.
When you replace a timing belt, confirm the profile and length against the belt you are removing. Read the marking on the back of the old belt: it should show the profile and length, and often the part number. If the marking is worn or missing, measure the pitch and the overall length, or send us photos of the belt and the drive. We can help confirm that this Optibelt Alpha Flex belt matches your application.
Dimensions
- Profile
- T5
- Pitch
- 5mm
- Length
- 10600mm
Frequently asked questions
- What do the T5 profile and 10600 mm length mean for my drive?
- T5 is a metric timing belt profile with a 5 mm pitch. The 10600 mm length is the datum length. Both must match your pulleys and center distance for the belt to fit and transmit load correctly.
- How do I confirm this is the right belt for my equipment?
- Check the marking on the back of the belt you are replacing. It should show the profile and length. If it is unreadable, measure the pitch and length, or send us photos of the belt and the drive so we can help confirm the match.
- What information do you need to quote this belt?
- Send the part number 75 T5 / 10600 AFX, the quantity you need, and any details about the drive. If you are unsure about the profile or length, include the old belt marking or photos, and we will help confirm the correct belt.