Timing belt Optibelt 75 T10 / 7200 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 75 T10 / 7200 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 75 T10 / 7200 AFX and any equivalents.
The Optibelt 75 T10 / 7200 AFX is a timing belt from the Alpha Flex series. It has a T10 profile and a length of 7200 mm. This type of synchronous belt is used in drives where timing between the pulley and the belt must be maintained.
To confirm fit, match the belt marking on the back of the old belt to the part number 75 T10 / 7200 AFX. The profile is T10 and the length is 7200 mm. The pitch is 10 mm. If the marking is worn or unreadable, measure the old belt and compare the profile and length to these values.
Timing belts are commonly found on industrial drives such as conveyors, pumps, and other equipment where synchronization is required. The T10 profile and 7200 mm length define the belt's geometry. When replacing, inspect the pulleys for wear or damage and verify that the belt tension is set according to the drive manufacturer's instructions.
For a quote, send the part number 75 T10 / 7200 AFX by WhatsApp or email. If you need help confirming the right belt or an equivalent, include the old belt's marking and the drive details. The team can assist with selection.
Dimensions
- Profile
- T10
- Pitch
- 10mm
- Length
- 7200mm
Frequently asked questions
- What is the profile and length of this belt?
- The Optibelt 75 T10 / 7200 AFX has a T10 profile and a length of 7200 mm. The pitch is 10 mm.
- How do I confirm this belt fits my drive?
- Check the marking on the back of your old belt for 75 T10 / 7200 AFX. If it matches, the profile and length are correct. If not, measure the old belt and compare the profile and length to the values above.
- What should I send to request a quote?
- Send the part number 75 T10 / 7200 AFX by WhatsApp or email. If you need help confirming the right belt or an equivalent, include the old belt's marking and any drive details you have.